GK Global
← Trails & Tales

History · Engineering · Long read · 7 min read

The Nilgiri Mountain Railway: The Rack Line to Ootacamund

India's only rack railway climbs almost two kilometres from the plains at Mettupalayam to Ooty on a toothed rail, behind Swiss-built steam engines. How it was built, how it works, and how to ride it.

By Gopakumar Rajan for GK Global, Adimali, Munnar · Trails & Tales by GK

A blue X class steam locomotive of the Nilgiri Mountain Railway taking water at Ketti station, with blue-and-cream carriages among tall eucalyptus trees
X class steam locomotive No. 37384 takes water at Ketti, on the upper section between Coonoor and Ooty, in February 2005. Photo: A. M. Hurrell (source, CC BY-SA 3.0, via Wikimedia Commons), resized by GK Global.

At Mettupalayam, at the foot of the Nilgiri hills, the little blue-and-cream train waits with its steam engine at the back, not the front. That is the first clue that this is no ordinary railway. Over the next 46 kilometres it will climb from about 326 metres above sea level to about 2,203 metres at Udhagamandalam, the hill station the British called Ootacamund and everyone now calls Ooty. On the steepest stretch the engine pushes the carriages up a slope of 1 in 12, and it can only do so because a toothed wheel under the engine grips a toothed rail laid between the tracks.

The Nilgiri Mountain Railway is the only rack railway in India, and part of the UNESCO World Heritage Site of the Mountain Railways of India. For the people of the High Range it is also a cousin of our own lost hill railway (see the Kundala Valley Railway).

At a glance

A railway to the Blue Mountains

Ootacamund grew in the nineteenth century into the summer capital of the Madras Presidency, but reaching it meant a long and difficult climb by road from the plains. A railway was proposed as early as 1854. One early scheme, put forward with the Swiss engineer Niklaus Riggenbach, the pioneer of rack railways, was turned down because no one in government was willing to recommend hauling passengers up such steep slopes. Riggenbach and J. L. L. Morant of the Royal Engineers are still remembered as the first to conceive the line.

A company to build the railway was formed in 1885, and work began in the early 1890s. The engineers chose the system devised by another Swiss engineer, Roman Abt, in which a pair of toothed rails is laid in the middle of the track, with their teeth offset, so that the pinion wheels of the engine always have a tooth in mesh. Heavy rains damaged the works, but the line from Mettupalayam to Coonoor, about 27 km, was finally opened on 15 June 1899.

The company could not raise the money to go further, and in 1903 the Government of India bought the line. Its own engineers built the extension from Coonoor to Ooty, which was steep but could be worked by ordinary adhesion without a rack. The line reached Fernhill and then Ooty in 1908.

Elevation profile of the Nilgiri Mountain Railway from Mettupalayam to Ooty0 m5001,0001,5002,0000 km1020304046Mettupalayam, 326 mKallar, about 390 mCoonoor, about 1,710 mOoty, 2,203 mAbt rack sectionDistance from Mettupalayam (km). Heights approximate. Chart: GK Global.
The climb from Mettupalayam to Ooty. The rack section (red) between Kallar and Coonoor rises about 1,300 metres in roughly 20 km; beyond Coonoor the line is worked by adhesion. Heights are approximate. Chart: GK Global, from Southern Railway, UNESCO and IRFCA figures.

How the rack works

From Mettupalayam to Kallar the line is almost level and the train runs like any other. At Kallar the rack begins. Between Kallar and Coonoor the gradient is as steep as 1 in 12: for every 12 metres it travels, the train rises 1 metre. No ordinary locomotive could hold a train on such a slope, so the engines are fitted with pinion wheels that engage the double toothed rack laid between the running rails.

The engine is coupled at the downhill end of the train, so that it pushes the carriages up the hill and holds them back on the way down. Because of the slope and the monsoon weather the trains use two independent braking systems, one acting on the wheels and one on the rack, and each carriage has its own brakesman. Beyond Coonoor the gradient eases to a ruling 1 in 23 and the rack ends. There are three tunnels on this upper section, the longest some 282 metres, and the maximum speed on the line is about 30 km/h.

The engines

The rack section is still worked by steam. The X class locomotives, built by the Swiss Locomotive and Machine Works of Winterthur, have powered the line for most of its life: the oldest in service date from the 1920s, and later engines of the same design were built in the 1950s. Newer oil-fired engines of the same type were added in the 2010s. On the upper section from Coonoor to Ooty, diesel locomotives usually take over.

UNESCO and the Mountain Railways of India

In 1999 the Darjeeling Himalayan Railway became the first railway in Asia to be inscribed on the World Heritage List. In July 2005 the Nilgiri Mountain Railway was added to the listing, which was renamed the Mountain Railways of India, and the Kalka Shimla Railway followed in 2008. UNESCO's evaluation singled out the Nilgiri line's rack system and its survival as a working railway.

Riding the line

The full journey from Mettupalayam to Ooty takes about five hours uphill and about three and a half hours down. The scenic train runs once a day in each direction between Mettupalayam and Ooty, connecting at Mettupalayam with the overnight Nilgiri Express from Chennai, and additional trains run on the Coonoor to Ooty section. Seats are few and sell out quickly, especially in the summer season, so book well ahead through Indian Railways. The best views are on the right-hand side going up, over the Kallar valley and the tea gardens below Coonoor (see a guide to Munnar tea).

From Munnar, the Nilgiris are a long day's drive by way of Coimbatore. Many travellers combine them with Kodaikanal, the other great hill station of the southern Ghats (see Kodaikanal).

Timeline

Questions people ask

Why is the Nilgiri Mountain Railway special?

It is the only rack railway in India, climbing slopes of up to 1 in 12 with toothed rails, and it still uses steam on its steepest section.

How long is the train journey to Ooty?

About five hours from Mettupalayam to Ooty, for 46 km.

When was the Ooty toy train built?

The line opened to Coonoor in 1899 and was extended to Ooty in 1908.

Is the Nilgiri Mountain Railway a World Heritage Site?

Yes. It was added to the Mountain Railways of India World Heritage Site in July 2005.

(Read also the Kundala Valley Railway, the Top Station ropeway and Kodaikanal.)

See it for yourself, with a local driver who knows these roads.

Book a Munnar Jeep Safari

Sources & further reading

  1. Wikipedia: Nilgiri Mountain Railway
  2. UNESCO World Heritage Centre: Evaluation of the Nilgiri Railway (944 bis)
  3. Google Arts & Culture (Indian Railways Heritage Directorate): The one-of-a-kind Nilgiri Mountain Railway
  4. IRFCA: Nilgiri Mountain Railway
  5. IRFCA: History of the Nilgiri railway
  6. FIBIS Wiki: Nilgiri Mountain Railway
  7. Tamil Nadu Tourism: The Nilgiri Mountain Railway

Figures are from the sources listed and were checked in November 2026. Park timings and road conditions change, so please confirm before you travel.